Restore your Old Furniture again and give new look to your Home


Almost every household has wooden furniture that has become obsolete and old-fashioned and you want to replace it with a new one. But you don’t actually need to dump that piece and invest money in buying a new one. To everyone’s surprise, restoring it and giving it a new life is quite easy now. Furniture restoration is an effective way of giving it a brand-new look, irrespective of the type of damages it has developed, including scratches, coffee stains, wine stains, peeling of vanish, gouges etc. Let’s know more about this wonderful option.

What’s the Process of Furniture Restoration?


The process can be time-consuming, but it is not always complicated. One needs to possess the right products and the correct tools to carry out the restoration work and complete it in an award-winning speed. If you have an antique piece of furniture design that is priceless, and you don’t want to get rid it, then you can go for restoration to bring it back to life.

Few Priceless Steps for Furniture Restoration

Furniture Restoration

1. Primary safety:

People who want to restore their furniture by themselves will require certain tools and chemicals which can be hazardous to health. Individuals must take certain precautions before starting any restoration work. The first step is to gather the correct equipment and tools that will take care of the safety of the individual and his or her family members. Wearing long sleeves, rubber gloves, eyewear, and other protective gear is necessary to prevent getting burnt from chemical splattering. One should avoid working in a closed room, as toxic vapors may release during the process and you should not inhale them.

2. Identifying different types of finish

It is necessary to know the type of finish present in the old furniture, and only then one should start with the furniture restoration work. It is quite hard to differentiate between finishes like varnish, shellac and lacquer. hence, they might require a few experiments. Enamel, paint and other pigmented finishes can be identified easily. Oil, penetrating sealer, oil finishes are the easiest to be identified, as the lack of shine determines that they require restoration.

3. Cleaning

Restoration of furniture is often very easy and requires just good cleaning. However, when talking about a method that involves scrubbing, rattan surfaces, etc., one needs to start with oil-based cleaner to get rid of the dirt on the surface of the furniture. One can also use a solution of liquid detergent and warm water. It is important to remember that the solution must be applied using a cloth, and you should make the wood drenched in liquid. Once you have wiped off the dirt, dry the surface using a clean and soft cloth.

4. The Re-amalgamation processes

Re-amalgamation is the process used to repair any finish during the furniture restoration process. The cracks and scratches developed on the surface of the furniture can be repaired by applying a solvent to cover the imperfections. The solvent will appear glossy initially, but after it dries, it becomes dull and forms a finish to cover all the scratches and cracks.

5. Refinishing

In this step, you need to apply a new coat of finish to get a brand-new look for the furniture. Before carrying out this process, one must complete all the repair work required in the furniture, like filling cracks, fixing broken parts, etc. Then the surface must be sanded with sandpaper of 100-120 grit. Finally, clean the surface with a tack cloth.


Furniture restoration can be a fun-filled process and will bring an entirely new look to your old furniture. One can easily restore all types of furniture, like a dresser, table, chair etc. The process is easier when one follows the above-mentioned steps thoroughly.  Although the process requires a little bit of time and patience, the result is highly satisfying when you get a new look for their old furniture.

Follow by Email


Please enter your comment!
Please enter your name here