Plumbing problems are serious issues and if you have dealt with such problem in past or presently dealing with the same, you must know how embarrassing those issues can be. Hence, it is important to call a plumber when you feel the need for an expert to fix the issues at the earliest.
However, those who have already faced such issue will advise you to avoid them at all costs. When you can get the problem fixed all under twenty bucks and relatively easily, why would you spend two hundred dollars an hour? So, don’t overlook the issue and engage a professional plumber who provide quick solution for plumbing supply Akron Ohio.
Tank Condensation:
In most cases, the common cause of the excess water on the floor of the toilet is water condensing on the outside of the bathroom’s tank and dripping onto the floor. This is generally considered as the tank ‘sweating.’ Normally, the temperature of the water inside the tank is cold and that of the air outside the tank is usually warm and steamy. This difference in temperature of the water inside the tank is one of the common reasons of the tank condensation or sweat. This problem is more often experienced in the months of summer rather than in the months of cold winder. However, if the condition favors, the problem can can occur any time of the year.
Certainly there are easy solutions to this type of problem, such as anti-sweat toilet tank valves and toilet tank liners. Unfortunately, it is not easy to confirm that tank condensation or swat is responsible for the water on your floor. Hence, it would be a great idea to call in a professional who would perhaps wipe the outside of your tank completely with a towel. They will also detect whether or not water is collecting on the outside of the tank again.
Water Leakage From Inside To Toilet Tank:
If your problem is not caused by the tank condensation, it is likely that the tank might be at fault. This is fairly easy to detect. However, engaging a professional would save you time and labor. The process are as follows:
Remove the tank lid carefully
Add the coloring and don’t flush the tank
Wait a while for the until the tank water changes the color
Now check out the floor for water of same color
If colored water is dripping from anywhere on the tank, be assured that water is leaking. Now identify the spot where the water is coming from. The entire task can be easily done by expert plumbing contractors Akron.
Fill Valve Shank Gasket Leak:
Be sure to check the shank gasket where the fill valve is attached to the tank. The fill valve, also called a ballcock is nothing but a valve that allows water enter into the tank. The shank gasket is attached to the ballcock on the inside of the tank. Most of the plumbers usually perform colored water test to detect this kind of leak. They also check for possible cracks in the porcelain around or near the gasket. However, in case no cracks are detected, the shank nut need to be tightened underneath the tank to stop the leak. If the leak still persists, the gasket needs to be replaced.
